Forged Construction
Machined from a single block of 6061-T6 aluminum
Fitment Support
Talk to a fitment specialist before ordering
Secure Checkout
Multiple payment options available
Protected Delivery
Carefully packaged and insured
Showcase
Chevrolet Corvette C2
Turbine 17" · Polished
Specifications shown are for this car. Yours may differ, so we confirm fitment with you before we build.
Send us photos of your build. The ones we feature show up right here, with your car's own specifications.
Share your buildHow Our Wheels Are Made
In the 1960s, most wheels left the factory as stamped steel — pressed in pieces, welded together, dressed up with a hubcap. It was the best the era could build. Every VFW wheel starts differently: one solid block of forged aluminum, shaped under pressure and machined to tolerances that didn't exist back then. Same soul. Stronger metal.
Every wheel starts as one solid billet of 6061-T6 aluminum. No welds. No seams. The entire wheel is cut from that block.
A forging press shapes the billet under thousands of tons of pressure. This aligns the metal's grain and closes the voids left by casting. Heat treatment locks in the strength.
CNC machines cut the final shape. We confirm the fitment with you before setting the bolt pattern and backspacing.
Before shipping, we balance and inspect every wheel. Then it's crated and insured for the trip to your garage.
The design
A wheel should look right from across the street and reward a closer look. Here is what gives the Turbine its character, and what sits underneath it.
The Turbine reads as the knock-off turbine wheel these cars are known for. The spokes are sharpened and deepened, and the design is drawn around 17-inch proportions rather than scaled up from a smaller wheel.
Monoblock means the wheel is machined from a single forged block of 6061-T6 aluminum: no welds, no seams, no separate center and barrel bolted together.
A deep mirror polish carries light across the spokes and the rim lip, and the engraved aluminum center cap closes the design at the hub.
Heritage
The original
Chevrolet offered a Kelsey-Hayes knock-off wheel on the Corvette from 1963 through 1966. Cast in aluminum, it mounted with a single centre spinner that a race crew could knock off with a lead hammer and change in one motion. It is the wheel most people picture on a mid-year Corvette. The casting was its weak point: porosity was common enough that the cars ran inner tubes.
What we changed
We machine ours from a single forged block of 6061-T6 aluminum. Forging aligns the grain and closes the voids left by casting. We designed it around 17-inch proportions instead of simply enlarging a 15-inch wheel, so the spoke spacing still looks right. That extra inch makes room for modern tires and a proper disc-brake setup.
The spinner is a cap. Your lug nuts do the work.
Specs & Fitment
Start with the published specs. And tell us about your car, especially if the brakes, suspension, or ride height have changed.
Have these details ready
Designed specifically for classic Corvette applications with no suspension modifications required on supported setups.
Vehicle names indicate fitment only. Vintage Forged Wheels is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by General Motors.
Build inspiration
This wheel on the cars it was drawn for. Styling inspiration; we confirm fitment for your car.
More for your build
Questions Before You Order
Every classic is a little different. These are the questions customers ask most before ordering.
Still have questions?
Tell us what you're building. We'll work out the fitment with you.
